* SP-808 SYSTEM SOFTWARE UPDATE USING SMF
(UPDATE SMF DISK P/No. 17048911)

The latest system software of the SP-808 is stored in the
Standard MIDI File (SMF) format. Use the following procedure
to update the SP-808:

1. Connect a MIDI cable between the MIDI OUT connector of a
   MIDI Sequencer that can play back SMF data, and the]
   MIDI IN connector of SP-808. It is convenient to use a
   MIDI Sequencer such as a SB-55 sound brush that can play
   back SMF's continuously.
2. Power on while holding down [STATUS (TRACK SELECT)]
   and [EFFECTS (BAL/EQ/FX)] above Fader A. "Waiting MIDI... "
   will be displayed.
3. Play back the SMF data in order number 1 to 8. While the
   data is being received "Receiving.. (x/8)" will be displayed
   and the pad indicator (PAD) blinks. ("x" is the SMF data
   number being received.)
4. When all of SMF data is received "Update System? (Y/N)"]
   will appear in the display. Press [ENTER/YES].

NOTE: Never turn the power off while the message
"* KEEP POWER ON *"is being displayed.

5. When "Update Complete" and "You may TURN OFF" appear on
   the display, turn the power off and turn it on again.